5
5
6
5-8
Memory Keys
NOTE
• Keys that already have settings stored in them are displayed with a black square (
right corner of the key.
• If you select a key that already has settings stored in it, the settings are displayed.
• You can also name keys with no settings stored in them.
• If there are more stored copy settings than are currently displayed, you can scroll through the list
by pressing [
] or [
].
Enter a name ➞ press [OK].
The maximum number of characters that you can enter for a key name is 10.
The assigned name appears on the key.
NOTE
• For instructions on entering characters, see Chapter 2, "Basic Operations," in the Reference
Guide.
• If you press [OK] without entering any characters, the key name reverts to its current name
(default M1 to M9).
Press [Cancel].
) in the lower