Canon iR3530 Manual page 94

2
● To select an envelope size:
2-30
Paper Selection
❑
Select the desired paper type ➞ press [OK].
If you are printing onto the back side of a previously printed sheet, press [2nd Side of
2-Sided Page].
IMPORTANT
• Make sure that the correct paper is selected. If the setting is wrong when printing on special
paper, especially on heavy paper, it may cause false print, or make the fixing unit dirty and the
paper may be clang to it. If this happens, you may have to call your local authorized Canon
dealer to fix the machine.
• If you select a nonstandard paper size, Finisher mode, Two-sided Printing, or Cover/Job
Separator mode cannot be specified.
NOTE
For more information on the paper types, see Chapter 2, "Basic Operations," in the Reference
Guide.
❑
Press [Stack Bypass].
If you want to select the stack bypass when a paper size/type is already selected for the
current or reserved job, press [StackBypass Setting] to specify the desired paper size/type.
❑
Press [Envelope].