Canon iR3530 Manual page 49

❑
Select the desired envelope type ➞ press [OK].
The display returns to the paper size selection screen.
IMPORTANT
If the envelope type is not selected correctly, a paper jam will occur.
❑
Press [OK].
The paper size/type currently loaded and the paper size/type reserved to be loaded are
displayed, as shown on the screen below.
NOTE
If there is more than one reserved job waiting to print, only the last paper size/type specified for
the reserved copy job is shown on the Paper Select screen and Copy Basic Features screen.
4
Press [Done].
This completes the settings for a reserved copy job using the stack bypass. The subsequent
steps show you how to load paper into the stack bypass and complete the scanning and
printing process of the reserved job.
The last paper size/type specified
for the reserved copy job
The paper size/type currently
loaded
Reserved Copying
1
1-35