Interrupt Mode - Canon iR3530 Manual

Interrupt Mode

1
This mode enables you to Interrupt the current job or a reserved job to make priority copies.
This mode is useful if you need to make a rush copy during a long copy job.
NOTE
You can make interrupt copies whenever the machine is ready to scan.
1
2
1-42

Interrupt Mode

Press .
If you want to make copies after changing the Department ID while Department ID
Management is enabled, press
(numeric keys). (See Chapter 2, "Basic Operations," in the Reference Guide.)
NOTE
The current job does not stop printing immediately after you press
stops only when the actual printing of the priority or interrupt copy starts.
Place your originals ➞ set the desired copy modes.
NOTE
• To cancel the Interrupt mode, press
• To cancel previously set copy modes, press
➞ enter the Department ID and password using
.
. (The Interrupt mode itself is not cancelled.)
-
. Printing of the current job