Canon iR3530 Manual page 51

7
Select the desired paper size.
If the following screen is displayed, adjust the width of the slide guides ➞ specify the paper size
➞ press [OK].
1
If the following screen is displayed, adjust the width of the slide guides to match the paper size
stored in Stack Bypass Standard Settings, or set Stack Bypass Standard Settings to 'Off' in
Common Settings (from the Additional Functions screen). (See Chapter 4, "Customizing
Settings," in the Reference Guide.)
IMPORTANT
Set the paper size to the same size as the paper loaded in the stack bypass.
1-37
Reserved Copying