Finisher-S1/Puncher Unit-R1 - Canon imageRUNNER 3530 Reference Manual

Finisher-S1/Puncher Unit-R1

The Finisher-S1 is equipped with the following finishing modes: Collate, Group,
Offset, and Staple. (See "Finishing Modes," on p. 3-17.)
The Puncher Unit-R1 is equipped with the Hole Punch mode.
If the optional Copy Tray-J1 is attached to the right side of the machine, and the
optional Additional Finisher Tray-B1 is attached to the Finisher-S1, prints can be
delivered to three different locations.
IMPORTANT
•
The optional 3 Way Unit-A1 is required to install the Finisher-S1.
•
The Finisher-S1 cannot be attached with the optional Inner 2 Way Tray-D1.

Finisher-S1/Puncher Unit-R1

3
3-15