2
Press [Light] or [Dark] for each function to adjust the
exposure ➞ press [OK].
The selected mode is set.
3
Press [Done] repeatedly until the Basic Features screen
appears.
Automatic Feeder Cleaning
If your originals have black streaks or appear dirty after scanning them through the
optional feeder, clean the rollers of the feeder by repeatedly feeding blank sheets of
paper through it.
IMPORTANT
This procedure is necessary only if the optional Feeder (DADF-N1) is attached.
NOTE
It takes approximately 20 seconds to clean the feeder.
1
Press
If necessary, see the screen shot in step 1 of "Zoom Fine Adjustment," on p. 4-72.
(Additional Functions) ➞ [Adjustment/Cleaning].
Adjusting the Machine
4
4-75