Canon imageRUNNER 3530 Reference Manual page 209

3
Select the desired standard local print settings for each mode
➞ press [Done].
If the desired standard local print settings are not displayed, press [▼] or [▲] to
scroll to the desired settings.
Details of each item are shown below.
[Paper Select]:
[Copies]:
[Finisher]:
[Two-sided Print]:
[Erase Document After Printing]: Set whether to erase a document from memory
[Merge Documents]:
The selected mode is set.
4
Press [Done] repeatedly until the Basic Features screen
appears.
Select the paper source.
Set the number of copies from 1 to 9,999 sets.
Set the type of collating.
Set whether to perform two-sided printing.
after it prints.
Set whether to merge documents, if you select
multiple documents that are stored in an inbox
for printing.
Specifying Common Settings
4
4-53