Entering the System Management Mode
If Department ID Management Is Enabled
1
Enter the System Manager ID and System Password using
❑
Press [Department ID] ➞ enter the System Manager ID.
❑
Press [Password] ➞ enter the System Password.
❑
Press
The System Management mode is enabled.
NOTE
Make sure to enter the System Manager ID and System Password that were stored
in System Manager Settings in System Settings (from the Additional Functions
screen). (See "Specifying the System Manager Settings," on p. 6-2.)
II
System Management of the imageRUNNER 3530/2830/2230
-
(numeric keys).
(ID).