Puncher Unit-R1; Inner 2 Way Tray-D1 - Canon imageRUNNER 3530 Reference Manual

Puncher Unit-R1

Item
Paper
Hole Punching System
Punch Hole Quantity, Hole
Diameter
Distance between Punch
Holes
Paper Size in Which Holes
Can be Punched
Punch Waste Tray Capacity
Power Source
Power Consumption
Dimensions (H x W x D)
Weight

Inner 2 Way Tray-D1

Item
Capacity
Power Source
Power Consumption
Dimensions (H x W x D)
Installation Space (W x D) 34" x 29 3/4" (862 mm x 755 mm)
Weight
17 to 32 lb bond (64 to 128 g/m
Sequential processing system
Two or three holes, 3/8" (8 mm)
Two holes: 2 3/4" (70 mm)
Three holes: 4 1/4" (108 mm)
Two holes: LGL, LTRR
Three holes: 11" x 17", LTR
When approximately the following number of sheets have
been punched:
Two holes: 2,500
Three holes: 1,500
From the optional Finisher-S1
10 W maximum
6 7/8" x 19 7/8" x 5 1/8" (175 mm x 505 mm x 130 mm)
Approximately 8.6 lb (3.9 kg)
Specifications
Upper Output Tray: 100 sheets (LTR), 50 sheets (other sizes)
Lower Output Tray: 250 sheets (LTR), 100 sheets (other
sizes)
From the main unit
Approximately 16 W
6" x 7" x 21 1/2" (151 mm x 176 mm x 546 mm)
Approximately 8.6 lb (3.9 kg)
Specifications
2
)
Specifications
9
9-9