Canon imageRUNNER 3530 Reference Manual page 51

IMPORTANT
If the main power indicator on the control panel does not light even though the main
power switch is ON, be sure to check the breaker to see if it is OFF. (See "If the
Power Does Not Turn ON," on p. 8-77.)
3
The screens shown below are displayed while the system
software is loading.
❑
The Start Up screen is displayed until the machine is ready to scan.
If a message is displayed on the touch panel display, proceed to step 4.
The machine is ready to scan in approximately 15 seconds (at a room
temperature of 68 ) after the screen above appears (approximately 30
seconds if the optional UFR II Printer Kit is installed).
The screen below is displayed when the machine is ready to scan.
F
Main Power and Control Panel Power
1
1-17