Ricoh SP 4510 DN User Manual page 98

3. Troubleshooting
Message
"Unauthorized Copy Prevention
error occurred. Job cancelled."
"User Paper Type Error"
"You do not have a privilege to
use this function. This job has
been cancelled."
"You do not have a privilege to
use this function. This job has
been cancelled."
"You have no privilege to use
this func. Operation canceld."
Messages during Direct print from a memory storage device
Message
"99: Error"
96
Cause
The resolution is set to a value
less than 600 dpi when
[Unauthorized Copy Prevention]
is specified.
The printer does not recognize
the paper type specified using
the printer driver.
The entered Login User Name
or Login Password is not correct.
The logged in user is not
allowed to use the selected
function.
The logged in user does not
have the privileges to register
programs or change the paper
tray settings.
Causes
This data cannot be printed.
The specified data is either
corrupt or not supported by
the Direct printing function
from memory storage devices.
Solution
On the printer driver, set the
resolution to 600 dpi or higher,
or deselect [Unauthorized Copy
Prevention].
Check that the printer is
connected to the network
correctly and bidirectional
communication is enabled. If the
problem persists, confirm the
user paper type settings of the
printer. For details, see
"Registering Unique Names to
Paper Types", Operating
Instructions.
Check that the Login User
Name and Login Password are
correct.
For details about how to set
permissions, see Security Guide.
For details about how to set
permissions, see Security Guide.
Solutions
Check that the data is valid.
For details about the kinds of
data supported by the Direct
printing function from memory
storage devices, see "Direct
Printing from a Memory
Storage Device", Operating
Instructions.