Ricoh SP 4510 DN User Manual page 86

3. Troubleshooting
Message
"86: Error"
"91: Error"
"92: Error"
"Address book is in use."
"Auto-user prog. failed."
"Cannot print."
"Classification Code Error"
"Collate cancelled."
"Collate: Page max."
84
Cause
Parameters of the control code
are invalid.
Printing was canceled by the
auto job cancel function due to
a command error.
Printing was canceled because
the [Job Reset] key or the
[Suspend/Resume] key was
pressed on the printer's control
panel.
The printer currently cannot
perform authentication because
the Address Book is being used
by another function.
Automatic registration of
information for LDAP
Authentication or Windows
Authentication failed because
the Address Book is full.
You have no privileges to print
the PDF file you want to print.
The classification code is not
specified with the printer driver.
Collate was canceled.
The amount of free memory is
insufficient to perform collating.
Solution
Check the print settings.
Check that the data is valid.
Perform the print operation
again as necessary.
Wait a while, and then retry the
operation.
For details about the automatic
registration of user information,
see Security Guide.
Contact the owner of the
document.
Select [Optional] for the
classification code. For details
about how to specify
classification code settings, see
"Registering Classification
Codes", Operating Instructions.
Turn the printer off, and then
turn it on again. If the message
appears again, contact your
service representative.
Reduce the number of pages to
be printed or install the optional
SDRAM.