Ricoh SP 4510 DN User Manual page 88

3. Troubleshooting
Message
"Function use denied."
"HDD is full."
"HDD not installed."
"I/O buffer overflow."
86
Cause
The print job was cancelled
because of one of the following:
• The user does not have
privileges to print.
• No privileges to print are
assigned to the entered
user name or user code, or
• A wrong password was
specified for the user
name.
The hard disk became full while
printing a Sample Print, Locked
Print, Hold Print, or Stored Print
file. Delete unnecessary files
stored in the printer.
The printer received a stored
job file but no hard disk is
installed.
An input buffer overflow
occurred.
Solution
Enter the user name or user
code with privileges to print, or
enter the correct password for
the user name.
Reduce the data size of the
Sample Print, Locked Print, Hold
Print, or Stored Print file.
When printing with the
PostScript 3 printer driver, the
hard disk capacity for fonts and
forms has been exceeded.
Delete unnecessary forms or
fonts registered to the printer.
Install a hard disk.
• Select [Font Priority] for
[Memory Usage] in
[System].
• In [I/O Buffer] under the
[Host Interface] menu, set
the maximum buffer size to
a larger value.
• Reduce the number of files
being sent to the printer.