Ricoh SP 4510 DN User Manual page 92

3. Troubleshooting
Message
"Address Book is currently in
use by another function.
Authentication has failed."
"Auto-registration of user
information has failed."
"Classification Code is
incorrect."
"Classification Code is
incorrect."
"Collate has been cancelled."
"Command Error"
"Compressed Data Error."
90
Cause
The printer currently cannot
perform authentication because
the Address Book is being used
by another function.
Automatic registration of
information for LDAP
Authentication or Windows
Authentication failed because
the Address Book is full.
The classification code has not
been entered, or the
classification code has been
entered incorrectly.
The classification code is not
supported by the printer driver.
Collate was canceled.
An RPCS command error
occurred.
The printer detected corrupt
compressed data.
Solution
Wait a while, and then retry the
operation.
For details about automatic
registration of user information,
see Security Guide.
Enter the correct classification
code.
Select [Optional] for the
classification code. For details
about how to specify
classification code settings, see
"Registering Classification
Codes", Operating Instructions.
Decrease the number of files
sent to the printer or install the
optional SDRAM module. For
details about installing SDRAM
module, contact your service
representative.
Check that the communication
between a device and the
printer is working correctly.
• Check the connection
between the computer and
the printer.
• Check that the program
you used to compress the
data is functioning
correctly.