When You Cannot Print - Ricoh SP 4510 DN User Manual

3. Troubleshooting

When You Cannot Print

Problem
Printing does not start.
Printing does not start.
Printing does not start.
Printing does not start.
Printing does not start.
98
Cause
The power is off.
The cause is displayed on the
screen of the control panel.
The interface cable is not
connected correctly.
The correct interface cable is
not being used.
The interface cable was
connected after the printer was
switched on.
Solution
For details about how to turn on
the main power switch, see
page 26 "Turning On/Off the
Power".
Check the error message or
warning status on the display
panel, and then take the
required action. For details
about solutions, see page 71
"When Messages Are
Displayed".
For details about how to
connect interface cables
correctly, see
"Connecting the Printer",
Operating Instructions.
The type of interface cable to
use depends on the computer.
Be sure to use the correct one. If
the cable is damaged or worn,
replace it. For details about
interface cable, see
"Connecting the Printer",
Operating Instructions.
Connect the interface cable
before turning on the main
power switch.