Ricoh SP 4510 DN User Manual page 120

3. Troubleshooting
Problem
When printing combined prints
or bound prints.
An empty tray is selected by
Auto Tray Select, and the
document is not printed due to
out of paper error.
118
Check that the paper size and direction set in the printer driver are
the same as those set in the application.
If the settings are not the same, change the settings of the printer
driver.
If a paper tray is opened and closed while the printer is in Energy
Saver mode, the printer will initialize the tray upon recovery, but
the tray will not be selectable by Auto Tray Select.
To print from a paper tray that you opened and closed while the
printer was in Energy Saver mode, you must manually specify the
tray as the source paper tray before printing. When the printer
recovers from Energy Saver mode and completes initialization, it
will then print the document from the tray you have specified.
Solutions