Ricoh SP 4510 DN User Manual page 116

3. Troubleshooting
Problem
Print ends mid-job.
A print instruction was
issued from the computer,
but printing did not start.
PDF files do not print out/
cannot perform PDF direct
print.
PDF files do not print out/
cannot perform PDF direct
print.
PDF direct print produces
strange or malformed
characters.
"Resetting job..." appears
and printing is suspended.
Printing did not start even
though the specified print
time has already passed.
Printing did not start even
though the specified print
time has already passed.
Printing via wireless LAN is
slow.
114
Causes
An error might have occurred.
User Authentication may have been
set.
PDF files are password-protected.
PDF files cannot be printed if they are
print-disabled in PDF file security
setting.
Fonts were not embedded.
Memory is insufficient.
[Jobs Not Printed As Machn. Was
Off] was set to [Do not Print] in
[Printer Features], but at the specified
printing time, the main power switch
was turned off or the printer was in
Low Power Mode.
The time set on the printer or
computer is incorrect.
The number of jobs exceeds the
capacity of the printer.
Solutions
Check the printer's display
panel to see if an error has
occurred.
For details about User
Authentication, see Security
Guide.
To print password-protected
PDF files, enter the password
in [PDF Menu].
Change the PDF file security
setting.
Embed fonts in the PDF file you
want to print, and then print.
In [System], select [Memory
Usage] to [Font Priority].
Set [Jobs Not Printed As
Machn. Was Off] to [Prt
When Mach On] in [Printer
Features].
This function is available for SP
4520DN only.
Set the correct time on the
printer or computer.
Reduce the number of jobs.