Ricoh SP 4510 DN User Manual page 91

Message
"84: Error"
"85: Error"
"86: Error"
"91: Error"
"92: Error"
"98: Error"
Cause
There is no work area available
for image processing.
The specified graphics library is
unavailable.
Parameters of the control code
are invalid.
Printing was canceled by the
auto job cancel function due to
a command error.
Printing was canceled because
[Job Reset] or the [Suspended]
key was selected on the printer's
control panel.
The printer could not access the
hard disk correctly.
When Messages Are Displayed
Solution
• Select [Font Priority] for
[Memory Usage] in
[System]. Decrease the
number of files sent to the
printer.
• Decrease the number of
files sent to the printer or
install the optional SDRAM
module. For details about
installing SDRAM module,
contact your service
representative.
• Check that the data is
valid.
• Decrease the number of
files sent to the printer or
install the optional SDRAM
module. For details about
installing SDRAM module,
contact your service
representative.
Check the print settings.
Check that the data is valid.
Perform the print operation
again as necessary.
Turn the main power switch off
and then back on again. If the
message appears frequently,
contact your service
representative.
89