Account Screen; Account Setup Screen - ZyXEL Communications EMG1302-R10A User Manual

Chapter 21 Maintenance
The following table describes the labels in this screen.
Table 61 Maintenance > General
LABEL
System Name
Domain Name
Administrator
Inactivity Timer
Apply
Cancel

21.4 Account Screen

It is strongly recommended that you change your EMG1302-R10A's password.
If you forget your EMG1302-R10A's password (or IP address), you will need to reset the device.
See Section 21.8 on page 158
Click Maintenance > Account > User Account. The screen appears as shown.
Figure 92 Maintenance > Account > User Account
The following table describes the labels in this screen.
Table 62 Maintenance > Account > User Account
LABEL
User Account Entries
#
User Name
Group
Modify

21.4.1 Account Setup Screen

Account Setup screen allows you to change a user account password.
152
DESCRIPTION
System Name is a unique name to identify the EMG1302-R10A in an Ethernet network.
Enter the domain name you want to give to the EMG1302-R10A.
Type how many minutes a management session can be left idle before the session times
out. The default is 5 minutes. After it times out you have to log in with your password again.
Very long idle timeouts may have security risks. A value of "0" means a management
session never times out, no matter how long it has been left idle (not recommended).
Click Apply to save your changes back to the EMG1302-R10A.
Click Cancel to exit this screen without saving.
for details.
DESCRIPTION
This is the index number of a user account.
The EMG1302-R10A's user account name.
The belonging of the user account.
Click the Edit icon to open the Account Setup screen. Account Setup screen allows to
change the user account password.
EMG1302-R10A User's Guide