Removing The Handlebar Grip; Installing The Handlebar - E-TON EV3 E-MO Service Manual

STEERING SYSTEM

REMOVING THE HANDLEBAR GRIP

1. Remove
• Handlebar grip
Removing step :
• Blow compressed air between the handlebar
and handlebar grip, and gradually push the
grip off the handlebar.
CHECKING THE HANDLEBAR
1. Check
• Handlebar
WARNING
Do not attempt to straighten a bent handlebar
as this may dangerously weaken the handlebar.

INSTALLING THE HANDLEBAR

1. Handlebar
Tighten the bolt.
45 Nm( 4.5 m•kg, 32.5 ft•lb)
2. Install
• Handlebar grip
Refer to "MAINTAINENCE FRONT BRAKE" in
cheaper 3.
TIP
Before installing the handlebar grip,should be
put oil on the left headlebar grip.
7-15
CHAS