Lev Interface (Testing Interface) - E-TON EV3 E-MO Service Manual

DRIVER
Testing interface
connector
Panel
connector
Driver
connector
Testing interface
wiring
USB connector USB
4-7

LEV INTERFACE (TESTING INTERFACE)

1. Testing: Lev Interface (testing interface)
Testing interface software
SC9003-EGC2-0000
N O T I C E
List the all possible causes according to trouble-
shooting and be sure to check and confirm all
other causes shall be excluded before testing
driver according to testing interface
How to operate testing interface
• Remove frontal fender
• Remove the connector between instrument
panel and driver (as illustrated in the left) and
connect the 4 pin connector of the testing interface
with the driver connector and the other end
connects with the UBS connector of the computer.
• Inert the key to switch on the power.
Please install the testing interface software and
testing interface driver by first use.
Testing interface connector
SC9004-EGC2-0000
• Start the testing interface software on the
software as illustrated in the following:
CONT