Chk Adj; Periodic Maintenance Chart For The Emission Control System - E-TON EV3 E-MO Service Manual

INTRODUCTION/
PERIODIC MAINTENANCE/LUBRICATION
PERIODIC CHECKS AND ADJUSTMENTS
INTRODUCTION
This chapter includes all information necessary to perform recommended checks and adjustments.
These preventive maintenance procedures, if followed, will ensure more reliable motorcycle operation
and a longer service life. The need for costly overhaul work will be greatly reduced. This information
applies to motorcycles already in service as well as to new motorcycles that are being prepared for sale.
All service technicians should be familiar with this entire chapter.

PERIODIC MAINTENANCE CHART FOR THE EMISSION CONTROL SYSTEM

ITEM
No.
• Check operation and adjust brake lever free play.
1
Brake (drum)
• Checking and replace the hose if necessary.
• Check tread depth and for damage.
2
Tires
• Replace if necessary.
• Check bearing for looseness or damage. Replace
3
Wheel bearings
if necessary.
• Check operation and correct if necessary.
4
Front fork
• Replace if necessary.
• Check bearing play and steering for roughness.
Steering bearings • Replace if necessary.
5
• Lubricate with lithium-soap-based grease.
• Check operation and for oil leakage.
Rear shock absorber
6
assembly
• Replace if necessary.
7 • Check operation and lubricate.
Main stand
• Check battery box for cracks or damage.
8
Battery
• Clean
• Make sure that all nuts, bolts and screws are
Chassis fasteners
9
properly tightened.
Moving parts
10
• Lubricate.
and cables
• Check runout and for damage, and replace if
11
Wheels
necessary.
• Check operation and correct if necessary
Lights, signals
12
• Adjust headlight beam.
and switches
Front and rear
• Check operation and correct if necessary.
13
brake switches
* Since these items require special tools, data and technical skills, have an E-TON dealer perform
the service.
TIP
• After 15,500 mileages has been reached or 18 months has been past, an additional maintenance
shall be conducted in every 2,500 km or 2 months.
• It should check and replace ahead of time in a dirt area or rainy day.
• Please check and replace ahead of time after by long riding distance or heavy load.
• Replace the brake cable every two years or if cracked or damaged. If find the cracks or damage,
should replace the new one immediately.
CHECKS OR MAINTENANCE JOB
ODOMETER READING (km)
First 500km 3000km 5500km
or or
or
1 month 3 month
6 month
Every 1,000km
Every 12,000km
3-1
CHK
ADJ
8000km 10500km 13000km 15500km
or or or or
9 month 12 month 15 month 18 month
ANNUAL
CHECK