Checking The Brake Drums - E-TON EV3 E-MO Service Manual

FRONT BRAKE / REAR BRAKE
3. Measure
• brake shoe lining thickness
Measuring points
TIP
Replace the brake shoes as a set if either is
found to be worn to the wear limit.
Brake lining thickness
3.0 mm (0.12 in)
<Limit>: 1.5 mm (0.06 in)

CHECKING THE BRAKE DRUMS

The following procedure applies to each brake.
1. Check
• brake drum inside diameter
Brake drum inside diameter
85.0 mm (3.35 in)
<Limit>: 86.0 mm (3.39 in)
INSTALLING THE FRONT AND THE REAR
BRAKES
Reverse the "Removal" procedure.
Note the following points.
1. Lubricate
• brake camshaft
• pivot pin
Lithium-soap-based grease
N O T I C E
During installation, lightly grease the brake
camshaft and the pivot pin. Wipe off the excess
grease.
7-8
CHAS
a
a