Troubleshooting - E-TON EV3 E-MO Service Manual

CHARGER
No output electricity
voltage
Excessively low output
electricity voltage
The battery charging still
can't reach the floating
charging phase (in green
light)
Status
Power switch is
not turned to ON.
Incorrect connection of
electric pole
(output fuse burned out)
115/230VAC Incorrect
selection on switch
115/230VAC Incorrect
selection on switch
Battery is aged or damaged Replace with new battery
Select wire of proper diameter

TROUBLESHOOTING

If the troubleshooting still can't be attained after
conducting the steps as in the following list, please
contact the E-TON Co., Ltd. or the authorized
dealer.
Possible cause
5-6
BAT
–
CHA
Solution
Turn to ON position
Replace the fuse
Maintenance and repair
is needed.
Turn the switch to
the correct position
Excessively narrow
output wire diameter
+