Bracket, Paper Detect (Input Sensor) Removal - Lexmark X422 Laser MFP Service Manual

Bracket, paper detect (input sensor) removal

1. Remove the print cartridge to expose latches in the bracket.
Leave the door open.
2. Remove the duplex tray assembly. See
removal" on page 4-29
3. Disconnect the cable to the sensor or remove the sensor and
cable together.
4. Unlatch the bracket by pushing from inside the MFP and pulling
from the duplex side.
"Duplex tray assembly
for more information.
Repair information
7001–001
4-21