Scanner Flatbed Motor Assembly Removal - Lexmark X422 Laser MFP Service Manual

7001–001

Scanner flatbed motor assembly removal

1. Remove the scanner document tray. See
tray assembly" on page 4-87
2. Remove the scanner document cover. See
removal" on page 4-68
3. Remove the right and left ADF covers. See
ADF cover removal" on page 4-71
cover removal" on page 4-74
4. Remove the ADF. See
for more information.
5. Remove the R2 and R1 idler. See
on page 4-94
for more information.
6. Remove the scanner cover. See
page 4-68
7. Remove the CCD and CCD belt. See
removal" on page 4-82
removal" on page 4-84
8. Remove the flatbed ground screw.
9. Disconnect the flatbed motor.
4-88
Service Manual
for more information.
"Scanner ADF removal" on page 4-75
and "Scanner R1 idler removal" on page 4-92
for more information.
and
for more information.
"Scanner document
for more information.
"Scanner cover
"Scanner right
and "Scanner left ADF
for more information.
"Scanner R2 idler removal"
"Scanner cover removal" on
"Scanner CCD carriage
"Scanner CCD timing belt