Ways To Flash The Machine - Lexmark X422 Laser MFP Service Manual

Ways to flash the machine

Using FTP
1. Boot the MFP into normal operating mode.
2. Get IP address to machine by going into the printers
administration menu and selecting TCP/IP.
3. FTP to the MFP using a FTP client.
4. Place the first file on the machine by issuing a put command.
The machine goes through the flash sequence.
5. After the machine reboots, repeat steps 2 and 3 as needed.
Using the Web server on the printer
1. When the firmware files are where you can access them from a
PC, open a Web browser and point it to the MFP IP address.
2. Press the configuration button on the Web page.
3. Press the update code link under other settings.
4. When the security warning pops up, press Yes.
5. In the Java applet that opens up, browse to the file you want to
use to flash the printer.
6. Press the Flash button. The machine goes through the flash
sequence and reboots.
7. Repeat the process as needed with other files.
7001–001
Diagnostic aids
3-17