5. Remove two screws in the scanner base [A].
6. Remove MFP left side cover. See
on page 4-11
7. Remove the MFP RIP card cage cover. See
(with card in place) removal" on page 4-58
information.
8. Disconnect the following cables from the RIP card.
•
SCU RIP harness [A]
•
SCU power [B]
•
SCU AFE [C]
•
OPU-RIP cable [D]
Warning: When feeding cables through the RIP cage, take care not
to strip the insulation from the cables. This could result in a short.
A
for more information.
"Left side cover removal"
"RIP card cage
for more
Repair information
7001–001
4-81