7001–001
9. Route the disconnected cables from the RIP card through the
chimneys to clear the printer.
10. From the rear of the machine, slide the scanner assembly
forward and lift assembly off the printer.
Scanner CCD carriage removal
1. Remove the document tray assembly. See
document tray assembly" on page 4-87
2. Remove the flatbed cover. See
page 4-73
3. Remove the right and left ADF covers. See
ADF cover removal" on page 4-71
cover removal" on page 4-74
4. Remove the ADF. See
for more information.
5. Remove the R2 and R1 idler. See
on page 4-94
for more information.
6. Remove the scanner cover. See
page 4-68
7. Disconnect the CCD-SCU ribbon cable from the SCU board,
and route the cable up through the scanner.
4-82
Service Manual
for more information.
"Scanner ADF removal" on page 4-75
and
"Scanner R1 idler removal" on page 4-92
for more information.
"Scanner
for more information.
"Flatbed cover removal" on
"Scanner right
and
"Scanner left ADF
for more information.
"Scanner R2 idler removal"
"Scanner cover removal" on