MPF roller assembly removal
1. Remove the upper body MPF assembly. See
housing assembly (with paper flag) removal" on page 4-66
for more information.
2. Remove the MPF cover. See
(multipurpose feeder cover) removal" on page 4-10
information.
3. Remove the left side and inner covers. See
removal" on page 4-11
4. Remove the roller cover, one (1) screw. See
housing assembly removal" on page 4-41
information.
5. Remove the lower body MPF assembly. See
housing assembly removal" on page 4-41
information.
CAUTION:
– The lower body MPF assembly remains electrically
connected since it is not being replaced.
– Use care with the cable.
– Rotate the unit upside down to reduce stress on the cable.
"Lower front cover
for more information.
Repair information
7001–001
"Upper (MPF)
for more
"Left side cover
"Lower (MPF)
for more
"Lower (MPF)
for more
4-47