3-Pin And 2-Pin Connectors Removal - Lexmark X422 Laser MFP Service Manual

To completely remove the top cover:
9. Remove the stud hinges.
10. Remove the top.
The front cover remains attached to the top cover.
3–pin and 2–pin connectors removal
1. Remove the RIP card cage. See
place) removal" on page 4-58
2. Remove the rear cover. See
page 4-15
3. Unplug the wires on both sides of the connectors.
4. Unsnap connectors and remove to the left side.
7.Open the front cover.
8.Remove the E–clips from both hinges that
connect the charge roller and top cover [A].
for more information.
A
"RIP card cage (with card in
for more information.
"Rear cover removal" on
Repair information
7001–001
4-19