Intermec CK30 Service Manual page 24

Chapter 2 — Replacing Parts
14
Screw
(1 place)
6 Lift up on the Bluetooth radio module and remove it from the main
PCB.
7 Replace the Bluetooth radio module.
8 Replace the Phillips screw that attaches the Bluetooth radio retaining
clip to the main PCB.
9 Connect the display flex cable and the keypad flex cable to the main
PCB.
10 Replace the main PCB and secure it with the two Phillips screws
removed in Step 3. Make sure the keypad flex cable properly z-folds
under the main PCB.
11 Close the CK30. For help, see "Closing the CK30" on page 27.
Bluetooth radio
retaining clip
Bluetooth
radio module
Flip main PCB
over to access
Bluetooth radio
Keypad
flex cable
CK30 Handheld Computer Service Manual
Screw
(2 places)
Display
flex cable