Horizontal Inlcine Arm Replacement - Vision Fitness S7100 Suspension elliptical Service Manual

cHapteR 7: paRt ReplaceMent GuiDe
7.18 HoRizontal incline aRM ReplaceMent
1) remove the 4 screws holding the plastic cover over the juncture of the swing arm and the incline arms and remove the cover (Figures a &
B).
2) remove the 2 screws holding the horizontal incline arm to the vertical incline arm (Figure C).
fiGuRe b
fiGuRe a fiGuRe c
3) remove the 2 screws holding the plastic cover that is mounted over the arm juncture (Figure D) and remove the cover.
4) remove the 4 screws / nuts holding the arm juncture together and remove the horizontal incline arm (Figures E & F).
fiGuRe D fiGuRe e fiGuRe f
5) reverse steps 1-4 to install a new horizontal incline arm.
47