7.15 linK aRM ReplaceMent - continueD
4) remove the pedal assembly (Figure E).
5) remove the long screw holding the link arm to the pedal arm (Figure F).
fiGuRe e
6) remove the link arm (Figure G).
7) reverse steps 1-6 to install a new link arm. NOTE: when reconnecting the link arm to the dual action handlebar, make sure that both
bushings are present within the link arm (Figure h).
fiGuRe G
cHapteR 7: paRt ReplaceMent GuiDe
fiGuRe f
fiGuRe H
43