cHapteR 8: SuSpenSion elliptical aSSeMbly GuiDe
8.3 aSSeMbly inStRuctionS - continueD
* remove the button head cap bolt and
large silver washer from the left hand
dual action arm rotation housing shaft.
then slide the left dual action arm on
the right rotation housing and secure in
place with a button head cap bolt and
washer.
* Insert a spacer bushing onto each
side of the left hand link arm bearing.
slide the link arm between the flanges
of the dual action arm bracket. Insert
a button head screw and flat washer
through the holes to connect the
brackets. secure with a washer and
nut.
* repeat these steps on the right side.
59