cHapteR 7: paRt ReplaceMent GuiDe
7.2 conSole ReplaceMent
1) remove the 4 screws holding the console to the frame (Figure a).
fiGuRe a
2) Disconnect the console cable and hr wire connections from the defective console and remove the console (Figures B & C).
fiGuRe b
fiGuRe c
3) Connect the console cable to the new console.
4) Carefully push the wires into the console and mast until they are clear of the console / mast connection and attach the console to the mast
using the 4 screws you removed in step 1.
5) test the suspension elliptical for function as outlined in section 7.21.
24