Vision Fitness S7100 Suspension elliptical Service Manual page 59

cHapteR 8: SuSpenSion elliptical aSSeMbly GuiDe
8.3 aSSeMbly inStRuctionS - continueD
* slide the incline frame pivot shaft into the incline
pivot tube at the rear of the unit.
* slide the bottom of the left incline arm over the
incline pivot shaft and let it rotate forward resting it
on the ground. repeat on the right side. notE:
the incline pivot shaft should be centered in the
incline pivot tube. Use the 2 button head bolts and
washers to pull the incline arms in snug against the
incline pivot tube.
* Do not tighten the 4 bolts at the bottom of the
incline arm.
55