Specifying settings from the control panel
4.23
Time adjustment settings
The machine's internal clock can be corrected via the network.
Time adjustment parameters
The time adjustment parameters are as follows:
Item
NTP Setting
NTP Server Address
Port No.
After specifying this setting, touch [1 System Setting] in the Administrator
Setting, touch [3 Date/Time Setting], and then set the date.
Periodic automatic adjustment is not performed.
bizhub C351 (Phase3)
Description
Specify whether to turn on the NTP.
Sets the IP address of the NTP server. For details on spec-
ifying the settings, refer to "NTP server address" on
page 4-125.
Set the port number used to communicate with the NTP
server. To change the value, press the [C] (clear) key, and
then use the keypad to type in the value (between 1 and
65535).
4
4-123