F6: Release Button To Use Dial; F7: Reverse Indicators - Nikon Z 7 Reference Manual

f6: Release Button to Use Dial

Selecting Yes allows adjustments that are normally made by
holding a button and rotating a command dial to be made by
rotating the command dial after the button is released. This
setting applies to the E, S, and c (E) buttons and also to
controls to which the following roles have been assigned using
Custom Settings f2 or g2 (Custom control assignment):
Choose image area, Image quality/size, White balance, Set
Picture Control, Active D-Lighting, Metering, Flash mode/
compensation, Focus mode/AF-area mode, Auto bracketing,
Multiple exposure, HDR (high dynamic range), Exposure
delay mode, Shutter spd & aperture lock, Peaking highlights,
Choose non-CPU lens number, and Microphone sensitivity.

f7: Reverse Indicators

If
displayed with negative values on the left and positive values
on the right. Select
values on the left and negative values on the right.
G button ➜ A (Custom Settings menu)
G button ➜ A (Custom Settings menu)
(W) is selected, the exposure indicator is
(V) to display positive
Menu Guide > A Custom Settings
281