F5: Release Button To Use Dial - Nikon Z fc N2016 Reference Manual

Option
[50 frames]
c [Rating]
P [Protect]
C [Photos only] Skip to the next or previous photo.
1 [Videos only] Skip to the next or previous video.
u [Folder]

f5: Release button to use dial

Selecting [Yes] allows adjustments that are normally made by holding a
button and rotating a command dial to be made by rotating the
command dial after the button is released. This ends when the button is
pressed again, the shutter-release button is pressed halfway, or the
standby timer expires.
･ [Release button to use dial] applies to controls to which the
following roles have been assigned using Custom Settings f2
[Custom controls (shooting)] or g2 [Custom controls]: [Choose
image area], [Image quality/size], [White balance], [Set Picture
Control], [Active D-Lighting], [Metering], [Flash mode/
compensation], [Release mode], [Release mode (save frame)],
[Focus mode/AF-area mode], [Auto bracketing], [Multiple
exposure], [HDR (high dynamic range)], [Exposure delay mode],
[Focus peaking], [Choose non-CPU lens number], and
[Microphone sensitivity].
A Custom Settings: Fine-tuning camera settings
Skip forward or back 50 frames at a time.
Skip to the next or previous pictures with the selected
rating. To choose the rating, highlight [Rating] and
press 2.
Skip to the next or previous protected picture.
Rotate the sub-command dial to select a folder.
G button U A Custom Settings menu
380
Description