Main Pcb Unit / Metering Fpc Unit - Nikon D3 VBA18001 Repair Manual

Main PCB unit
・Mount the main PCB (#5001).
・Tighten three screws (#1532).
・Connect the four FPCs to each connector.
Metering FPC unit
・Put three springs (#1134).
・Mount the Metering FPC unit (#B25005).
・Turn the three screws (#1133) all the way softly to the end,
and give them three counterclockwise turns.
・Arrange the Metering FPC (#B25005) as below.
・Connect the two FPCs to each connector.
#1532×3
Main PCB #5001
- Ａ  ･ -
logo Q0440 forGraphic
070518 Gdesign ito
INC
VBA18001-R.3719.A
#1133×3
#B25005
#1134×3