B–48
TERMINAL AND CONNECTOR REPAIR–HOW TO INSTALL AND REMOVE SPECIAL CONNECTORS
Lever is not locked
64
(2)
Lever
(3)
[Case 2]
1.
Cut the connection of the connector
Lever
(1)
(2)
(3)
(4)
NOTICE:
Do not hold the wire harness to pull it.
Wire Harness Repair Manual (RM1022E)
Hold the connector to prevent it from slip off and push
it down until you hear a click to lock it.
Confirm that the lever is securely locked.
Hold the area indicated by the arrow in the illustration
The lock is released and the lever is lifted up.
Lift the lever up fully.
Cut the connection of the connector.