TERMINAL AND CONNECTOR REPAIR–TERMINAL REPLACEMENT
Locking
Lug
Locking
Lug
Special Tool
[Retainer at Full Lock Position]
Special
Tool
Terminal Retainer
[Retainer at Full Lock Position]
Stopper
[Retainer at Temporary Lock Position]
Service hole
[Case 2]
(1)
Special Tool
Terminal
Retainer
[Case 3]
(1)
Terminal
Retainer
[Case 4]
Wire Harness Repair Manual (RM1022E)
Using the special tool, push the terminal retainer
locking lug (clip) and pull the terminal retainer up to
the temporary lock position.
[Retainer at Temporary Lock Position]
Using the special tool, raise the retainer up to the
temporary lock position.
B–13
29