TERMINAL AND CONNECTOR REPAIR–TERMINAL REPLACEMENT
Terminal Deformation
(1) Terminal Bending in Vertical Direction
(2) Terminal Bending in Horizontal Direction
3° or less
(b)
Remove the insulation displacement female terminal
NOTICE:
D Do not repair the insulation displacement female
terminal.
D Always replace the part with a new one if any
terminals are removed.
5.
Inspect the terminal and the connector for
damage.
NOTE:
D The locking clip is easily damaged.
D Do not reuse the damaged part.
1° or less
1° or less
Wire Harness Repair Manual (RM1022E)
B–29
45