B–22
TERMINAL AND CONNECTOR REPAIR–TERMINAL REPLACEMENT
Good
Special
Tool
Special Tool
38
Bad
Special Tool
Lock
Special Tool
Lock
Lock Housing
Upper
Housing
Wire Harness Repair Manual (RM1022E)
Type M (For 0.64 of Insulation Displacement Connector
(IDC) Type)
(1)
Remove the Lower Housing
Using a special tool, release the lock and remove the lower
housing.
NOTICE:
D Do not apply too much force to the lock arm.
D Mark the upper housing and lower housing to
prevent mistakes when putting them together.
(2)
Remove the Upper Housing
Using a special tool, release the lock and remove the upper
housing from the lock housing.
NOTICE:
D Do not apply too much force to the lock arm.
D Mark the upper housing and lower housing to
prevent mistakes when putting them together.