Table of Contents
Advertisement
B–42
TERMINAL AND CONNECTOR REPAIR–TERMINAL REPLACEMENT
Temporary Lock Position
Full Lock Position
58
Type C (For 0.64 Type Connector)
(a)
Insert the terminal.
HINT:
1.
Make sure the terminal is positioned correctly.
2.
Insert the terminal with terminal retainer in the
temporary lock position.
(b)
Insert the terminal until the terminal lance locks firmly.
HINT:
1.
Pull the terminal back gently to check whether it is
locked correctly.
2.
If it cannot be inserted easily, check the terminal and
the connector for damage.
NOTE: If the terminal to terminal lance does not lock
firmly, the double locking device cannot lock or terminal
retainer does not lock at full lock position so the terminal
backs out from connector.
(c)
Close terminal retainer.
The connector is fitted with a terminal retainer, return
it to the full lock position.
Wire Harness Repair Manual (RM1022E)
Hide quick links:
Advertisement
Table of Contents
