Table of Contents
Advertisement
B–20
TERMINAL AND CONNECTOR REPAIR–TERMINAL REPLACEMENT
Retainer
Initial condition
Outer
Lock
Inner
Special tool
Outer
Illustration from side B
Inner
36
Rubber Plug
Rubber Plug
A
B
Wire Harness Repair Manual (RM1022E)
(5)
Move the retainer until it becomes the initial condition.
Type J
[Male]
(1)
Remove the rubber plug.
(2)
Push the lock of the inner using the special tool.
(3)
Pull the wire to the direction of the arrow pushing the
lock up and remove the inner from the outer.
[Female]
(1)
Remove the rubber plug.
(2)
Insert the special tool into the outer shown in the
illustration. Then push the area A of the inner and
remove the inner from the outer.
Hide quick links:
Advertisement
Table of Contents
