TERMINAL AND CONNECTOR REPAIR–TERMINAL REPLACEMENT
Tool Hole
Special
Tool
Terminal Lance
0.64 Type
Special Tool
Tool Hole
Special Tool
Insulation Displacement Connector Type
(a)
Special
Tool
(b)
NOTICE:
D Do not use too much force. If the terminal does not
come out easily, repeat step (a).
D Always change the wire with the repair wire, in
accordance with step3.
Terminal
Lance
Wire Harness Repair Manual (RM1022E)
Using a special tool, push the terminal lance from the
tool hole.
Carefully withdraw the terminal from the connector by
pulling the lead toward the rear of the connector.
B–27
43