Cleaning The Fan Filter - Datamax W-Class Maintenance Manual

Adjustments and Maintenance
2.4.6

Cleaning the Fan Filter

The power supply fan filter should be cleaned as needed to prevent printer overheating. The cleaning
interval will depend upon the environment the printer is in. Clean the fan filter as follows:
 Turn 'Off' and unplug the printer.
 Loosen the Tabs and remove the Fan Guard and Filter from the printer.
Fan Guard
Tabs
(4 places)
 Dust off the filter. Or, if needed, using a mild detergent, wash the filter – If washed, allow the filter
to dry thoroughly. (As an alternative, replace the filter, P/N 17-2432-01).
2-33